Brand: JOOSTE
The double piston set consists of the piston, spring, plunger valve & 2 x polyurethane rings (green). It is used in the RDS cylinder and moves up and down on the rod...
R 863.90
Ex VAT:R 751.22
Brand: JOOSTE
The double piston set consists of the piston, spring, plunger valve & 2 x polyurethane rings (green). It is used in the RDS cylinder and moves up and down on the rod...
R 932.90
Ex VAT:R 811.22
Brand: JOOSTE
Single polyurethane ring (orange) that fits in the groove of the piston and prevents water from passing the piston on each stroke...
R 163.90
Ex VAT:R 142.52
Brand: JOOSTE
Single polyurethane ring (brown) that fits in the groove of the piston and prevents water from passing the piston on each stroke...
R 150.90
Ex VAT:R 131.22
Brand: JOOSTE
Single polyurethane ring (yellow) that fits in the groove of the piston and prevents water from passing the piston on each stroke...
R 150.90
Ex VAT:R 131.22
Brand: JOOSTE
Single polyurethane ring (purple) that fits in the groove of the piston and prevents water from passing the piston on each stroke...
R 158.90
Ex VAT:R 138.17
Brand: JOOSTE
Single polyurethane ring (green) that fits in the groove of the piston and prevents water from passing the piston on each stroke...
R 173.90
Ex VAT:R 151.22
Brand: JOOSTE
Jooste cylinder ringset AS100 is designed for the piston and consists of a spring plunger valve and a polyurethane ring (brown). The polyurethane ring plays a crucial role in preventing water from passing the piston during each stroke ensuring proper sealing and performance under pressure. This ring..
R 292.90
Ex VAT:R 254.70
Brand: JOOSTE
Jooste cylinder ringset AS50 is designed for the piston and consists of a spring plunger valve and a polyurethane ring (brown). The polyurethane ring plays a crucial role in preventing water from passing the piston during each stroke ensuring proper sealing and performance under pressure. This rings..
R 197.90
Ex VAT:R 172.09
Brand: JOOSTE
Jooste cylinder ringset AS60 is designed for the piston and consists of a spring plunger valve and a polyurethane ring (brown). The polyurethane ring plays a crucial role in preventing water from passing the piston during each stroke ensuring proper sealing and performance under pressure. This rings..
R 213.90
Ex VAT:R 186.00
Brand: JOOSTE
Jooste cylinder ringset AS70 is designed for the piston and consists of a spring plunger valve and a polyurethane ring (brown). The polyurethane ring plays a crucial role in preventing water from passing the piston during each stroke ensuring proper sealing and performance under pressure. This rings..
R 229.90
Ex VAT:R 199.91
Brand: JOOSTE
Jooste cylinder ringset AS80 is designed for use with the piston and consists of a spring plunger valve and a polyurethane ring (green). The polyurethane ring plays a crucial role in preventing water from passing the piston during each stroke ensuring proper sealing and performance under pressure. T..
R 260.90
Ex VAT:R 226.87
Brand: JOOSTE
The double ring set for the piston consists of the spring, plunger valve & 2 x polyurethane rings (brown). The polyurethane rings in the piston prevents water from passing the piston on each stroke...
R 315.90
Ex VAT:R 274.70
Brand: JOOSTE
The double ring set for the piston consists of the spring, plunger valve & 2 x polyurethane rings (yellow). The polyurethane rings in the piston prevents water from passing the piston on each stroke...
R 371.90
Ex VAT:R 323.39
Brand: JOOSTE
The double ring set for the piston consists of the spring, plunger valve & 2 x polyurethane rings (purple). The polyurethane rings in the piston prevents water from passing the piston on each stroke...
R 387.90
Ex VAT:R 337.30
Brand: JOOSTE
The double ring set for the piston consists of the spring, plunger valve & 2 x polyurethane rings (green). The polyurethane rings in the piston prevents water from passing the piston on each stroke...
R 395.90
Ex VAT:R 344.26
Brand: JOOSTE
The stainless-steel rod set for AS cylinders consists of stainless-steel spring (-10), 13NY36 valve stop, galvanised lock nut (-16) & stainless-steel lock nut (-9N). The rod moves the piston set up and down in the cylinder...
R 703.90
Ex VAT:R 612.09
Brand: JOOSTE
The stainless steel rod set for RDS cylinders consists of stainless steel spring (-10), 13NY36 valve stop, galvanised lock nut (-16) & stainless steel lock nut (-9N). The rod moves the piston set up and down in the cylinder...
R 711.90
Ex VAT:R 619.04
Brand: JOOSTE
The AS Cylinder consists of a stainless-steel tube & plunger set which is attached to the rod. A unique Jooste foot valve is fitted at the bottom of the cylinder. For use in boreholes up to a depth of 60m. Cylinder tube is 450mm with a stroke length of 320mm (12 1/2inch)...
R 5,586.90
Ex VAT:R 4,858.17
Brand: JOOSTE
The AS Cylinder consists of a stainless-steel tube & plunger set which is attached to the rod. A unique Jooste foot valve is fitted at the bottom of the cylinder. For use in boreholes up to a depth of 60m. Cylinder tube is 450mm with a stroke length of 320mm (12 1/2inch)...
R 2,616.90
Ex VAT:R 2,275.57
Brand: JOOSTE
The AS Cylinder consists of a stainless-steel tube & plunger set which is attached to the rod. A unique Jooste foot valve is fitted at the bottom of the cylinder. For use in boreholes up to a depth of 60m. Cylinder tube is 450mm with a stroke length of 320mm (12 1/2 inch)...
R 2,915.90
Ex VAT:R 2,535.57
Brand: JOOSTE
The AS Cylinder consists of a stainless-steel tube & plunger set which is attached to the rod. A unique Jooste foot valve is fitted at the bottom of the cylinder. For use in boreholes up to a depth of 60m. Cylinder tube is 450mm with a stroke length of 320mm (12 1/2inch)...
R 4,544.90
Ex VAT:R 3,952.09
Brand: JOOSTE
The AS Cylinder consists of a stainless-steel tube & plunger set which is attached to the rod. A unique Jooste foot valve is fitted at the bottom of the cylinder. For use in boreholes up to a depth of 60m. Cylinder tube is 450mm with a stroke length of 320mm (12 1/2 inch)...
R 2,466.90
Ex VAT:R 2,145.13
Brand: JOOSTE
The valve stop set is part of the foot valve which is fitted at the bottom of the cylinder where the water is drawn up. It consists of the valve stop (orange), O-ring, spring, washer & split pin...
R 237.90
Ex VAT:R 206.87
Brand: JOOSTE
The valve stop set is part of the foot valve which is fitted at the bottom of the cylinder where the water is drawn up. It consists of the valve stop (brown), O-ring, spring, washer & split pin...
R 173.90
Ex VAT:R 151.22
Brand: JOOSTE
The valve stop set is part of the foot valve which is fitted at the bottom of the cylinder where the water is drawn up. It consists of the valve stop (yellow), O-ring, spring, washer & split pin...
R 189.90
Ex VAT:R 165.13
Brand: JOOSTE
The valve stop set is part of the foot valve which is fitted at the bottom of the cylinder where the water is drawn up. It consists of the valve stop (purple), O-ring, spring, washer & split pin...
R 197.90
Ex VAT:R 172.09
Brand: JOOSTE
The valve stop set is part of the foot valve which is fitted at the bottom of the cylinder where the water is drawn up. It consists of the valve stop (green), O-ring, spring, washer & split pin...
R 213.90
Ex VAT:R 186.00
Brand: JOOSTE
The ball valve is designed to deliver a full stream of water under high pressure (10 bar) with a flow diameter of +-22mm. The ball valve can be installed in 5 different convenient positions...
R 821.90
Ex VAT:R 714.70
Brand: JOOSTE
The ball valve is designed to deliver a full stream of water under high pressure (10 bar) with a flow diameter of +-22mm. The ball valve can be installed in 5 different convenient positions...
R 821.90
Ex VAT:R 714.70
Brand: JOOSTE
The ball valve is designed to deliver a full stream of water under high pressure (10 bar) with a flow diameter of +-28mm. The ball valve can be installed in 5 different convenient positions...
R 1,069.90
Ex VAT:R 930.35
Brand: JOOSTE
The ball valve is designed to deliver a full stream of water under high pressure (10 bar) with a flow diameter of +-28mm. The ball valve can be installed in 5 different convenient positions...
R 1,066.90
Ex VAT:R 927.74
Brand: JOOSTE
The ball valve is designed to deliver a full stream of water under low pressure (3 bar) with a flow diameter of +-38mm. The ball valve can be installed in 5 different convenient positions...
R 1,108.90
Ex VAT:R 964.26
Brand: JOOSTE
The ball valve is designed to deliver a full stream of water under low pressure (3 bar) with a flow diameter of +-38mm. The ball valve can be installed in 5 different convenient positions...
R 1,108.90
Ex VAT:R 964.26
Brand: JOOSTE
Jooste force head high pressure 250m 40mm is designed for high-pressure applications with a delivery capacity of 250m this force head is fitted into a T-piece on the last riser pipe to prevent water being forced out at the rod the set includes a 16x500mm stainless steel rod ensuring strength and dur..
R 1,742.90
Ex VAT:R 1,515.57
Brand: JOOSTE
Brass force head housing (16mm) complete. The housing is a part of the force head and consists of the packing, a nut & the housing. Part of product at code AFB40...
R 932.90
Ex VAT:R 811.22
Brand: JOOSTE
Low pressure (60m) force head is fitted into a T-piece on the last riser pipe to prevent water being forced out at the rod. Consists of a 12x500mm stainless steel rod, brass housing & packing...
R 1,264.90
Ex VAT:R 1,099.91
Brand: JOOSTE
Spare part on the force head. Nut (16mm) designed to tighten the packing in the housing. Spare part on Jooste force head at code AFB40...
R 426.90
Ex VAT:R 371.22
Brand: JOOSTE
JOOSTE FORCE HEAD OIL 20ML. Specially formulated oil for use with Jooste force heads to ensure smooth functioning and extend the lifespan of the components. Designed to lubricate and protect the moving parts within the force head preventing wear and reducing friction. Helps maintain optimal performa..
R 23.90
Ex VAT:R 20.78
Brand: JOOSTE
Jooste force head packing improved is a new and upgraded packing designed for use on the FB40 and AFB40 force heads it provides better sealing performance and enhanced durability under high-pressure conditions the improved packing ensures efficient operation by preventing leaks and maintaining a str..
R 142.90
Ex VAT:R 124.26
Brand: JOOSTE
Stainless steel force head rod (16mmx500mm). Used with force head. Spare part on Jooste force head at code AFB40...
R 529.90
Ex VAT:R 460.78
Brand: JOOSTE
Oil seal, spare part of force head packing. Only use with oil supplied by Jooste. Spare part on Jooste force head at code AFB40...
R 14.90
Ex VAT:R 12.96
Brand: JOOSTE
The hand pump comprises a stainless-steel top cover, galvanised steel body, handle, and baseplate. It is suitable for household and rural water supply and can also be used for small-scale irrigation. The JOOSTE hand pump can be used to pump water from depths of up to 60 metres, by either pulling the..
R 7,955.90
Ex VAT:R 6,918.17
Brand: JOOSTE
The HDPE float valve ensures maximum water flow under high pressure (10 bar) with a leak-proof seal, durable construction, easy to install and corrosion resistant with minimal lime scale build-up. Flow diameter of 28mm with a flow capacity of over 20 000L/hr...
R 1,096.90
Ex VAT:R 953.83
Brand: JOOSTE
The HDPE float valve ensures maximum water flow under low pressure (3 bar) with a leak-proof seal, durable construction, easy to install and corrosion resistant with minimal lime scale build-up. Flow diameter of 38mm with a flow capacity of up to 30 000L/hr...
R 1,096.90
Ex VAT:R 953.83
Brand: JOOSTE
The pipe protectors are fitted onto the rods in the riser pipe and prevents the rods from rubbing against the pipes. Two pipe protectors per rod should be fitted just below the thread of the rods (at either end of the rod).A must for every borehole. Use with 12mm rod & 32mm pipe...
R 37.90
Ex VAT:R 32.96
Brand: JOOSTE
The pipe protectors are fitted onto the rods in the riser pipe and prevents the rods from rubbing against the pipes. Two pipe protectors per rod should be fitted just below the thread of the rods (at either end of the rod).A must for every borehole. Use with 16mm rod & 40mm pipe...
R 45.90
Ex VAT:R 39.91
Brand: JOOSTE
The pipe protectors are fitted onto the rods in the riser pipe and prevents the rods from rubbing against the pipes. Two pipe protectors per rod should be fitted just below the thread of the rods (at either end of the rod). A must for every borehole. Use with 16mm rod & 32mm pipe...
R 36.90
Ex VAT:R 32.09
Brand: JOOSTE
The pipe protectors are fitted onto the rods in the riser pipe and prevents the rods from rubbing against the pipes. Two pipe protectors per rod should be fitted just below the thread of the rods (at either end of the rod). A must for every borehole. Use with 16mm rod & 40mm pipe...
R 45.90
Ex VAT:R 39.91
Brand: JOOSTE
The pipe protectors are fitted onto the rods in the riser pipe and prevents the rods from rubbing against the pipes. Two pipe protectors per rod should be fitted just below the thread of the rods (at either end of the rod). A must for every borehole. Use with 16mm rod & 50mm pipe...
R 52.90
Ex VAT:R 46.00
Brand: JOOSTE
The pipe protectors are fitted onto the rods in the riser pipe and prevents the rods from rubbing against the pipes. Two pipe protectors per rod should be fitted just below the thread of the rods (at either end of the rod). A must for every borehole. Use with 20mm rod & 50(+) mm pipe...
R 52.90
Ex VAT:R 46.00
Brand: JOOSTE
Specialised force head rod with long thread (45mmx80mm). Made of stainless steel. Rod length 16x700mm...
R 600.90
Ex VAT:R 522.52
Brand: JOOSTE
The sub assembly is made up of an acetal adaptor, a Jooste non-return (one-way) valve, galvanised tee and a stainless-steel nipple. The adaptor is installed into the cylinder, below the foot valve. The submersible pump is attached to the bottom stainless-steel nipple. While the cylinder is in motion..
R 1,437.90
Ex VAT:R 1,250.35
Brand: JOOSTE
The sub assembly is made up of an acetal adaptor, a Jooste non-return (one-way) valve, galvanised tee and a stainless-steel nipple. The adaptor is installed into the cylinder, below the foot valve. The submersible pump is attached to the bottom stainless-steel nipple. While the cylinder is in motion..
R 1,706.90
Ex VAT:R 1,484.26
Brand: PONY
Pony Jorgensen 12″ Adjustable
Handscrew - (305 mm)
Information
The 12″ Adjustable Handscrew from Jorgensen holds tightly over broad areas and is designed to provide a large reach and
wide distribution of pressure.
Its jaws are made from seasoned hard maple and can be adjusted for holdin..
R 1,013.90
Ex VAT:R 881.65
Brand: PONY
12-Inch Jorgensen Heavy Duty Steel Bar Clamp
Information
Jorgensen steel bar clamps are seriously strong. Cast-iron stationary and sliding heads with an orange, powder coated
finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,000 pounds per squ..
R 480.24 R 533.90
Ex VAT:R 417.60
Brand: PONY
12-Inch Jorgensen Medium Duty Steel Bar Clamp - (305 mm long)
Description
Jorgensen steel bar clamps are seriously strong. Cast-iron stationary and sliding heads with an orange, powder coated
finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,0..
R 318.78 R 354.90
Ex VAT:R 277.20
Brand: PONY
Jorgensen 125mm Double Edge Flush Cut Pull Saw Blady Only
Japanese saws are the best-known pull saws. Unlike most traditional European saws that cut on the push
stroke, Japanese saws cut on the pull stroke. This also permits using a thinner, harder s..
R 253.58 R 281.90
Ex VAT:R 220.50
Brand: PONY
Jorgensen 150mm Folding Dovetail Pull Saw Blade Only
Japanese saws are the best-known pull saws. Unlike most traditional European saws that cut on the push
stroke, Japanese saws cut on the pull stroke. This also permits using thinner, harder steel th..
R 526.90
Ex VAT:R 458.17
Brand: PONY
Jorgensen 150mm Folding Dovetail Pull Saw
Japanese saws are the best-known pull saws. Unlike most traditional European saws that cut on the push
stroke, Japanese saws cut on the pull stroke. This also permits using a thinner, harder steel that
..
R 955.31 R 1,061.90
Ex VAT:R 830.70
Brand: PONY
18-Inch Jorgensen Heavy Duty Steel Bar Clamp
Information
Jorgensen steel bar clamps are seriously strong. Cast-iron stationary and sliding heads with an orange, powder coated
finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,000 pounds per squ..
R 555.80 R 617.90
Ex VAT:R 483.30
Brand: PONY
24-Inch Jorgensen Heavy Duty Steel Bar Clamp
Information
Jorgensen steel bar clamps are seriously strong. Cast-iron stationary and sliding heads with an orange, powder coated
finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,000 pounds per squ..
R 577.53 R 641.90
Ex VAT:R 502.20
Brand: PONY
24-Inch Jorgensen Medium Duty Steel Bar Clamp - (600 mm long)
Description
Jorgensen steel bar clamps are seriously strong. Cast-iron stationary and sliding heads with an orange, powder coated
finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,0..
R 372.60 R 414.90
Ex VAT:R 324.00
Brand: PONY
Jorgensen 240mm Folding Dovetail Pull Saw
Japanese saws are the best-known pull saws. Unlike most traditional European saws that cut on the push
stroke, Japanese saws cut on the pull stroke. This also permits using a thinner, harder steel that
..
R 1,214.06 R 1,348.90
Ex VAT:R 1,055.70
Brand: PONY
Jorgensen 240mm Pro Folding Dovetail Pull Saw
Japanese saws are the best-known pull saws. Unlike most traditional European saws that cut on the push
stroke, Japanese saws cut on the pull stroke. This also permits using a thinner, harder steel that
..
R 955.31 R 1,061.90
Ex VAT:R 830.70
Brand: PONY
Jorgensen 240mm Folding Dovetail Pull Saw Blade Only
Japanese saws are the best-known pull saws. Unlike most traditional European saws that cut on the push
stroke, Japanese saws cut on the pull stroke. This also permits using thinner, harder steel th..
R 631.35 R 701.90
Ex VAT:R 549.00
Brand: PONY
Jorgensen 250mm Pull Saw Blade Only
Japanese saws are the best-known pull saws. Unlike most traditional European saws that cut on the push
stroke, Japanese saws cut on the pull stroke. This also permits using thinner, harder steel that
..
R 555.80 R 617.90
Ex VAT:R 483.30
Brand: PONY
30-Inch Jorgensen Medium Duty Steel Bar Clamp - (760 mm long)
Description
Jorgensen steel bar clamps are seriously strong. Cast-iron stationary and sliding heads with an orange, powder coated
finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,0..
R 404.69 R 449.90
Ex VAT:R 351.90
Brand: PONY
36-Inch Jorgensen Heavy Duty Steel Bar Clamp
Information
Jorgensen steel bar clamps are seriously strong. Cast-iron stationary and sliding heads with an orange, powder coated
finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,000 pounds per squ..
R 737.90
Ex VAT:R 641.65
Brand: PONY
36-Inch Jorgensen Medium Duty Steel Bar Clamp - (910 mm long)
Description
Jorgensen steel bar clamps are seriously strong. Cast-iron stationary and sliding heads with an orange, powder coated
finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,0..
R 408.83 R 473.90
Ex VAT:R 355.50
Brand: PONY
The 36-Inch Steel I-Bar Clamp
Information
There's a reason Jorgensen I-bar clamps are our most popular heavy-duty steel bar clamps. The special steel I-bar design
is tremendously strong and stiff, and the clamp head is fixed for maximum resilience. A cold-drawn steel screw with
smoothl..
R 1,437.90
Ex VAT:R 1,250.35
Brand: PONY
4-Inch Lightweight Jorgensen gear clamp - (100 mm long)
Description
Lightweight Jorgensen gear clamps are ideal for projects that require constant use of clamping and unclamping. A
distinctive power bar design allows for rapid action, and a handy quick-release button allows for the in..
R 459.02 R 510.90
Ex VAT:R 399.15
Brand: PONY
The 48-Inch Steel I-Bar Clamp
Information
There's a reason Jorgensen I-bar clamps are our most popular heavy-duty steel bar clamps. The special steel I-bar design
is tremendously strong and stiff, and the clamp head is fixed for maximum resilience. A cold-drawn steel screw with
smoothl..
R 2,217.90
Ex VAT:R 1,928.61
Brand: PONY
Pony Jorgensen 12″ Adjustable Handscrew
Information
The 6 inch Adjustable Handscrew from Jorgensen holds tightly over broad areas and is designed to provide a large reach and
wide distribution of pressure.
Its jaws are made from seasoned hard maple and can be adjusted for holding mat..
R 510.90
Ex VAT:R 444.26
Brand: PONY
Steel bar clamps - 6 pack 150 mm
Jorgensen steel bar clamps are seriously strong. Cast-iron stationary and sliding heads with an orange, powder coated
finish are merged with a high-carbon, rust-resistant steel bar that packs a whopping 80,000 pounds per square inch of
tensile strength..
R 1,181.97 R 1,313.90
Ex VAT:R 1,027.80
Brand: PONY
The 60-Inch Steel I-Bar Clamp
Information
There's a reason Jorgensen I-bar clamps are our most popular heavy-duty steel bar clamps. The special steel I-bar design
is tremendously strong and stiff, and the clamp head is fixed for maximum resilience. A cold-drawn steel screw with
smoothl..
R 2,218.90
Ex VAT:R 1,929.48
Brand: PONY
The 72-Inch Steel I-Bar Clamp
Information
There's a reason Jorgensen I-bar clamps are our most popular heavy-duty steel bar clamps. The special steel I-bar design
is tremendously strong and stiff, and the clamp head is fixed for maximum resilience. A cold-drawn steel screw with
smoothl..
R 2,745.90
Ex VAT:R 2,387.74
Brand: PONY
8-Inch Lightweight Jorgensen gear clamp - (200 mm long)
Description
Lightweight Jorgensen gear clamps are ideal for projects that require constant use of clamping and unclamping. A
distinctive power bar design allows for rapid action, and a handy quick-release button allows for the in..
R 501.98 R 557.90
Ex VAT:R 436.50
Brand: PONY
Heavy-duty E-Z HOLD expandable bar clamp 450 mm
Our Jorgensen heavy-duty E-Z HOLD expandable bar clamps come with all the great features of our medium- and light-duty
E-Z HOLD expandable bar clamps, but they have a slightly larger reach and double the clamping force - 600 pounds! Made
..
R 966.17 R 1,073.90
Ex VAT:R 840.15
Brand: PONY
Jorgensen 18-Inch One-Handed Spreader Clamp [457 mm]
Information:
The first bar clamp to expand by joining two clamps together with no tools or added
accessories needed. The patented head design allows any two Jorgensen Bar Clamps
to be joined together for greater clamping capacity. ..
R 674.82 R 749.90
Ex VAT:R 586.80
Brand: PONY
Heavy-duty E-Z HOLD expandable bar clamp 600 mm
Our Jorgensen heavy-duty E-Z HOLD expandable bar clamps come with all the great features of our medium- and light-duty
E-Z HOLD expandable bar clamps, but they have a slightly larger reach and double the clamping force - 600 pounds! Made
..
R 1,009.13 R 1,121.90
Ex VAT:R 877.50
Brand: PONY
Jorgensen 24-Inch One-Handed Spreader Clamp [610 mm]
Information:
The first bar clamp to expand by joining two clamps together with no tools or added
accessories needed. The patented head design allows any two Jorgensen Bar Clamps
to be joined together for greater clamping capacity. ..
R 701.73 R 779.90
Ex VAT:R 610.20
Brand: PONY
Heavy-duty E-Z HOLD expandable bar clamp 900 mm
Our Jorgensen heavy-duty E-Z HOLD expandable bar clamps come with all the great features of our medium- and light-duty
E-Z HOLD expandable bar clamps, but they have a slightly larger reach and double the clamping force - 600 pounds! Made
..
R 1,062.95 R 1,181.90
Ex VAT:R 924.30
Brand: PONY
Jorgensen 36-Inch One-Handed Spreader Clamp [914 mm]
Information:
The first bar clamp to expand by joining two clamps together with no tools or added
accessories needed. The patented head design allows any two Jorgensen Bar Clamps
to be joined together for greater clamping capacity. ..
R 750.38 R 833.90
Ex VAT:R 652.50
Brand: PONY
4 Inch Jorgensen E-Z Hobby/Craft Clamp (150 mm)
Information
The Jorgensen E-Z Hold Hobby Craft Bar Clamp is ideal for hobby, craft, and model projects and can also be converted
to a spreader clamp.
Features include easy/comfortable one-handed clamping, 1-1/2" jaw re..
R 139.21 R 154.90
Ex VAT:R 121.05
Brand: PONY
Heavy-duty E-Z HOLD expandable bar clamp 154 mm
Our Jorgensen heavy-duty E-Z HOLD expandable bar clamps come with all the great features of our medium- and light-duty
E-Z HOLD expandable bar clamps, but they have a slightly larger reach and double the clamping force - 600 pounds! Made
..
R 917.53 R 1,019.90
Ex VAT:R 797.85
Brand: PONY
8 Inch Jorgensen E-Z Hobby/Craft Clamp (200 mm)
Information
The Jorgensen E-Z Hold Hobby Craft Bar Clamp is ideal for hobby, craft, and model projects and can also be converted
to a spreader clamp.
Features include easy/comfortable one-handed clamping, 1-1/2" jaw re..
R 156.80 R 174.90
Ex VAT:R 136.35
Brand: PONY
Drop-forged heavy-duty bar clamp - 6-inch | 152 mm [#75306]
Description
For hobbyists, carpenters, cabinetmakers, woodworkers, metalworkers, and professional tradespeople seeking a bar clamp
with superior rust resistance, look no further than the Jorgensen drop-forged bar clamp. The drop-forged..
R 330.90
Ex VAT:R 287.74
Brand: PONY
Drop-forged heavy-duty bar clamp - 12-inch | 305 mm [#75312]
Description
For hobbyists, carpenters, cabinetmakers, woodworkers, metalworkers, and professional tradespeople seeking a bar clamp
with superior rust resistance, look no further than the Jorgensen drop-forged bar clamp. The drop-forge..
R 354.90
Ex VAT:R 308.61
Brand: PONY
Drop-forged heavy-duty bar clamp - 18-inch | 450 mm [#75418]
Description
For hobbyists, carpenters, cabinetmakers, woodworkers, metalworkers, and professional tradespeople seeking a bar clamp
with superior rust resistance, look no further than the Jorgensen drop-forged bar clamp. The drop-forge..
R 677.90
Ex VAT:R 589.48
Brand: PONY
Drop-forged heavy-duty bar clamp - 18-inch | 450 mm [#75318]
Description
For hobbyists, carpenters, cabinetmakers, woodworkers, metalworkers, and professional tradespeople seeking a bar clamp
with superior rust resistance, look no further than the Jorgensen drop-forged bar clamp. The drop-forge..
R 426.90
Ex VAT:R 371.22
Brand: PONY
Pony Jorgensen 4 Pack F Clamp Set 2 x 150mm 2 x 300mm
x4 Pack F Clamps
Jorgensen steel bar clamps are seriously strong. Cast iron stationary and sliding heads with an orange,
powder-coated finish are merged with a high carb..
R 1,251.83 R 1,390.90
Ex VAT:R 1,088.55